| Herbal Chemical |
| Herbal Chemicals for Effluent Water |
| Herbal Chemicals for Sewage Water |
| Filter Equipments |
| Agriculture |
OUR PRODUCT CYPRA-KLEEN HERBAL LIQUID
Our key focus is to provide environment friendly solutions for water treatment. We cater to various industries like, pharmaceutical, rubber, food, textiles, steel, aluminium, plastic, paint, foundry, tiles and so on.
Our product CYPRA-KLEEN Herbal Liquid, which will definitely create your interest for your applications.
The Herbal Liquid is non-acidic in nature and when used in the system, the major portion of the scale, rust and algae shall be removed from the Cooling Towers, Boilers, Chilling Plants, Evaporators, Heat Exchangers, other tubes, pipelines etc. It will stop any kind of microbiological development inside the cooling tower and hence, Root-Out Algae. The product has unique property of removing Calcium and Magnesium from the water and thereby preventing scale formation of any kind. So the water shall flow properly and subsequently improvement in Heat Exchange.
UNIQUE PROPERTIES AND ADVANTAGES OF CYPRA-KLEEN HERBAL LIQUID
- First of its kind herbal water treatment liquid
- No much handling as it is Single Liquid Product
- Use of hazardous & harmful 4 to 5 chemicals is avoided
- Flow of Soft Water in the system
- No increment of TDS/Hardness in the system
- Excellent OXYGEN SCAVENGER characteristic
- Higher DELTA T is achieved in cooling tower
- System shall remain Scale-free, Rust-free, Algae-free hence, no replacement of pipe-lines frequently
- Annual or Periodical De-scaling can be controlled
- Reduction in Blow-Downs
- Improvement in Heat Exchange
- Water Quality improves
- Fuel Saving
- Early Boiler Pressure
- Non-acidic and neutral in nature
- No metal loss
- Cost effective
The Herbal Liquid does not have property of reactions but has a unique property to form complex of Calcium, Magnesium and higher valance metals (insoluble in water). This slowly settles at the bottom of the system because of its own weight. The old hard scale reacts with Herbal Liquid and forms porosity on the scale surface. The Herbal Liquid enters the porous portions and reaches to the surface of the body and forms a thin film between scale and body. Thus the Scale loses its sticking property and fall-down in loose condition.
Since dissolve metals in water to form insoluble complexes by the Herbal Liquid, naturally the food chain of Micro-organism shall cut off, therefore, the organism suffers due to non availability of salts for growth.
The Rust formation in the system is due to presence of Oxygen in the System Water. The herbal liquid is organic in nature, shall reduce dissolved oxygen in the Water and oxidize it, acts as an Oxygen Scavenger (dissolved oxygen is converted into carbon dioxide and oxides of nitrogen), hence, prevents formation of rust on the metal surface.
PROBLEMS DEVELOPED IN THE SYSTEM DUE TO WATER
Normally in Water, the Sodium, Potassium, Calcium, Magnesium and higher valance metals are available in dissolved condition. The Calcium & Magnesium salts are the main cause of formation of hard scale, hence, proper heat exchange does not take place.
In the case of Cooling Tower, the Hot Water is sprayed and heat exchange takes place. Water gets evaporated and its salts shall get deposited in the system as hard scale. Slowly, the concentration of Hard Scale increases.
In normal Water Treatment, some portion of the scale get dissolved and mixed with water, forming homogeneous condition. When evaporation takes place the scale settles on the body/metal and form a Hard Scale on it which acts as a hindrance for heat exchange. The scale formation in the pipe lines shall reduce the inside diameter which create BACK-PRESSURE in the system/pumps.
The normal water treatment is done by using 3 to 4 or sometimes more acidic chemicals, viz. Anti-Scaling agent, Anti-Rusting agent, Anti-Algae agent and so on. Whereas in our case only SINGLE HERBAL LIQUID is used for Removal of Scale, Algae, Rust, Dissolved Oxygen and other impurities.
WORKING OF CYPRA-KLEEN HERBAL LIQUID
The Herbal Liquid forms complex with metals and forms insoluble one and settles down due to own weight. The Herbal Liquid reacts with ions present on the scale surface and forms insoluble state. Due to porosity on the scale surface, the Herbal Liquid penetrates into scale and form a thin layer between body/metal and scale, hence, the grip get loosened and scale falls down.
The dissolved salts are transformed into insoluble one, the growth of salts stops due to cutting off of Food Chain. The Herbal Liquid is organic in nature, reacts with Oxygen in the water and thus reduction or elimination of Oxygen takes place, so it also acts as an Oxygen Scavenger, due to which Rust and Corrosion can be avoided.
ACTION BY CYPRA-KLEEN HERBAL LIQUID'S INGREDIENTS
The ingredients in Herbal Liquid take care of the problems created by water. Each ingredient has a unique property and roll in formulation of Herbal Liquid.
- NEEM has a major share in Herbal Liquid which helps in stopping and removing the Algae as Neem is one of the best Anti-Bacterial components.
- The combination of NEEM, JEERU & METHI, makes the best anti-bacterial, anti- fungal & anti-viral formulation.
- BANANA SAP is used to treat and penetrate the Calcium and Magnesium present as a scale in the system.
- FENUGREEK & MUSTERD SEEDS are the natural flocculants, so they act to settle the scales present in water.
- THETHANKOTIAI (Ancient Tamil Herb) has a unique adherence property, which helps the liquid to make a layer between the water and the system/body.
COMPARATIVE STATEMENT
| Cypra-Klear Herbal Liquid | Other Chemicals |
| 1. Neem based Herbal liquid | 1. Alkali/Acid based chemicals |
| 2. Eco Friendly | 2. Non-eco Friendly |
| 3. Non-corrosive | 3. Highly corrosive |
| 4. Complexes metals salts into insoluble | 4. Soluble into homogenous liquid |
| 5. Old scales can be removed by complexion | 5. Old scales always remain in the system |
| 6. Very less blow-downs/bleed-offs are done | 6. Blow-downs and Bleed-offs are done frequently. |
| 7. No new scale sticking on body | 7. More scale sticking on body |
| 8. Higher system efficiency, reduction in shut-downs, break-downs. | 8. No significant change in system efficiency, no reduction in shut-downs and break-downs. |
| 9. Removes major portion of algae and fungus effectively | 9. Remove small part of algae and fungus |
| 10. Single liquid takes care for treatment | 10. Use of Multiple Chemicals for treatment |
OBSERVATIONS in COOLING TOWER
2. Removal - Algae, Scale, Rust from the system.
3. Flow and fall of water increases
4. Change in Water color-initially more turbid and then clear
5. More heat exchange-delta T increases
6. Water Saving - No frequent bleed off required
7. No frequent cleaning is required of Sump Tanks, Splash Bars, Fills, Spray Nozzles, Structure, Basin, Louvers etc.
8. Change of Fills can be delayed unless mechanically damaged
9. Discharge Pressure increases
OBSERVATIONS in BOILER
2. Scale shall come out with blow-down water in Insoluble Condition and get settled in short time
3. Rust in Boiler, feed-water tank, pipe lines and other fittings shall be removed
4. Initially higher TDS in blow-down observed but after some time the TDS shall be maintained as per boiler design
5. Steam/Fuel Ratio increases significantly
6. Reduction of no. of blow-downs, hence, saving is achieved in Fuel and Water
7. Annual Cleaning: (a) Shut-down period reduced, (b) Heavy Acidic Treatment avoided
8. Feed Water pH required is not more than 7.0 to 7.5, so elimination of extra pH Booster chemicals which create scales in the system
FEW PARAMETERS REQUIRED FOR SUGGESTING DOSAGE
| FOR BOILER | FOR COOLING TOWER |
| 1. Capacity | 1. Sump Tank Capacity |
| 2. Running Hours | 2. Make-up water Quality-like RO/DM/Soft Water/Bore-well |
| 3. Working Load | 3. Make-up water Quantity |
| 4. Make-up water Quality-like RO/DM/Soft Water/Bore-well etc | 4. Working Load |
| 5. Make-up water Quantity | 5. Quantity of Water in circulation |
| 6. Condensate Return Quality(TDS/Hardness/pH) | 6. Pump Discharge Capacity |
| 7. Condensate Return Quantity | 7. Present Dose and its system |
| 8. Present Dose and its system | |
| 9. Feed Tank Capacity |
OUR CORE BELIEF QUALITY, INNOVATION, LEARNING AND OPENNESS
We always welcome good suggestions for up gradation in product, processes as well as in services and believe in learning our valued customers' needs and vision, to be able to anticipate their requirement and develop interdependence.
M.S.D.S. (MATERIAL SAFETY DATA SHEET)
| 1. Product Name | Chemical Character |
| CYPRA-KLEEN Herbal Chemical | Neem based herbal liquid |
| 2. Physical Data | |
| 2.1 Melting Point | Not Applicable |
| 2.2 Boiling Point | Not Established |
| 2.3 Decomposition Temperature | Above Water boiling point |
| 2.4 pH | 5 to 7 |
| 2.5 Solubility in Water | |
| (a) In all Proportions | Yes |
| (b) Above 20 deg Celsius | Yes |
| 2.6 Odour | Almost Odourless |
| 2.7 Physical Form | Liquid |
| 2.8 Color | Colorless |
| 3. Storage Stability and handling | |
| 3.1 Special Precautions for Transport & Storage | No Special Precautions are required. |
| 3.2 Incompatible Substances | None. |
| 3.3 Hazardous decomposition | None. |
| 3.4 Hazardous Polymerizations | Does not occur. |
| 3.5 Preventive & Protective measures | Not Required. |
| 3.6 Special Protective Measures | Not Required. |
| 3.7 Measure after Spillage/ Leakage | Wash with water. |
| 3.8 Disposal | Wash with water. |
4. Impact on Metals, Rubber and Allied products
No metal corrosion or deterioration on plastics, rubber and other products. It removes ionic metals like metal oxides, sulphate, nitrate etc. till the virgin metal is exposed .This liquid will have no effect on virgin metals.
5. Fire and Explosion Hazard of Material
Non-flammable, Non-explosive
